Siemens 108 the SSID broadcast

		Appendix
Problem	Possible cause	Remedy
You cannot estab-	You are outside the	ì Reduce the distance to the Gigaset
lish a wireless con-	range of the device.	WLAN Repeater 108. Align the aeri-
nection to the		als of the devices involved in trans-
Gigaset WLAN		mission for the best possible range.
Repeater 108.
	You have deactivated	ì Manually enter the SSID of the
	the SSID broadcast	Gigaset WLAN Repeater 108 for your
	option which means	wireless network adapter to set up
	that the Gigaset	the connection.
	WLAN Repeater 108
	does not appear in
	the network over-
	view.
	Encryption of the	ì Apply the encryption settings to
	transmitted data has	your wireless network adapter as
	been activated on	well.
	your Gigaset WLAN
	Repeater 108
	(WEP / WPA).
	The MAC filter on	ì From another PC, enter the relevant
	your Gigaset WLAN	MAC address in the table to permit
	Repeater 108 has	access (see page 61). Try using an
	been activated, but	Ethernet cable to connect a PC to
	your PC's MAC	the Gigaset WLAN Repeater 108.
	address has not been
	entered (Operating
	Mode Access point).

113