Siemens 108 Enter the, ìClick on Add, IP address type, Ethernet adapter Operating Mode, Configuring the Advanced Settings, Obtain an IP address automatically

Configuring the Advanced Settings

Please note:

If you use the Gigaset WLAN Repeater 108 in Access point Operating Mode and the integrated DHCP server has been activated, configure the network settings for the connected PCs so that the Obtain an IP address automatically option is activated. For more information about this please turn to "Assigning IP addresses automatically" on page 93. If you deactivate the Gigaset WLAN Repeater 108's DHCP server, you will have to assign a static IP address for the PCs via the network settings unless there is another DHCP server on the network. This is described on page 100.

You can specify static IP addresses for individual PCs which are then assigned by the DHCP server.

ìEnter the MAC address of the PC and the required IP address in the relevant fields.

ìClick on Add.ìClick on OK to apply the settings.

ìYou should restart all the devices once all the configuration settings have been made.

Ethernet adapter Operating Mode

ìIn IP address type, specify whether the Gigaset WLAN Repeater 108 should obtain its IP address automatically from an external DHCP server in the network or not.

–If you want to use a static IP address for your Gigaset WLAN Repeater 108 (factory setting for the IP address is 192.168.2.254), select the Static option and enter the IP address and subnet mask in the fields underneath. Make sure that the IP address you assign complies with the conventions for private IP addresses described on page 100.

50