Siemens 108 http://192.168.2.254, ìLaunch your Web browser, The login screen appears, To access the Gigaset WLAN Repeater 108's user interface:

The user interface

Launching the user interface

As described in the "First Steps" on page 9 chapter, you have connected your Gigaset WLAN Repeater 108 and made any changes necessary to the Ethernet card's network configuration (see the chapter "Integration in the network" on page 82). Your Gigaset WLAN Repeater 108 is connected to the mains power supply, the Power LED lights up, as does the WLAN LED. The LED for the local network lights up if you have connected a device directly using an Ethernet cable.

To access the Gigaset WLAN Repeater 108's user interface:ìLaunch your Web browser.

ìEnter the IP address of the Gigaset WLAN Repeater 108 in the browser's address field.

http://192.168.2.254The login screen appears.

Please note:

If the DHCP server in your Gigaset WLAN Repeater 108 has been activated (factory set- ting), it may take a while after connecting to your PC until your PC is automatically assigned an IP address and you can access the configuration program.

ìThe factory settings password is admin. Enter the password and click OK.

Please note:

For security reasons you should change the password at a later stage (see page 36).

16