Siemens 108 manual 116

Appendix

Problem	Possible cause	Remedy
You cannot access	You are not con-	ì Make sure you are properly
the Gigaset WLAN	nected to the Gigaset	connected to the Gigaset WLAN
Repeater 108 from	WLAN Repeater 108.	Repeater 108. Check the parameters
a PC, for example to		in the Gigaset WLAN Adapter Moni-
call the configura-		tor.
tion program (wire-
	The PC's network set-	ì Make sure that the PC has the right
less connection via	tings are wrong.	configuration for connecting to the
WLAN).		Gigaset WLAN Repeater 108, for
		example that the IP address and
		subnet mask have been set correctly
		or the obtaining the IP address auto-
		matically has been activated (see
		page 93).
	Your PC is configured	ì Manually assign a static IP address
	for the automatic	for your PC in your Gigaset WLAN
	obtaining of IP	Repeater 108 address block (see
	addresses, but the	page 100).
	DHCP server of your
	Gigaset WLAN
	Repeater 108 has
	been switched off.
	The IP address of your	ì Check the log of your DHCP server,
	Gigaset WLAN	from which the Gigaset WLAN
	Repeater 108 has	Repeater 108 obtained its IP
	changed as you have	address, to see which IP address was
	activated the	assigned to it and enter this address
	Obtained automati-	in your browser. Try resetting your
	cally option (see	Gigaset WLAN Repeater 108 to the
	page 47).	factory settings to once again obtain
		access via address 192.168.2.254
		(see page 11).
The Gigaset WLAN	The repeater function	ì Make sure that the repeater func-
Repeater 108 does	on the Gigaset WLAN	tion has been activated on both your
not work properly	Repeater 108 or on	Gigaset WLAN Repeater 108 and
in Repeater Operat-	the access point is	your access point (see page 47) or
ing Mode.	not activated.	read the corresponding chapter in
		your access point's manual).

114