Siemens 108 The, and, In the, Default gateway, Gigaset WLAN Repeater 108 A, Gigaset WLAN Repeater 108 B, Example of LAN settings with two repeaters

Basic Setup Wizard

If your network does not have a DHCP server yet, then you can use the DHCP server integrated in your Gigaset WLAN Repeater 108 to assign the IP addresses of the connected devices automatically.

ìIn this case, select the On option for the DHCP server.

ìIf you have activated the DHCP server integrated in your Gigaset WLAN Repeater 108, you should also check the following settings and make any changes that are necessary.

–The First issued IP address and Last issued IP address entries define the range of IP addresses that your Gigaset WLAN Repeater 108 should use to automatically assign IP addresses to PCs.

–In the Default gateway field, enter the IP address of your router that is to be used to connect your PCs to the Internet (e.g. 192.168.2.1).

Example of LAN settings with two repeaters

If you want to use several Gigaset WLAN Repeater 108 in the same network, make sure you assign different IP addresses to each of them. Use an address block that is within the selected subnet but not in the address block of the addresses automatically assigned by the DHCP server in your network. Switch off both associated DHCP servers.

For two repeaters in the same network, you could, for example, assign

uthe IP address 192.168.2.210 for Gigaset WLAN Repeater 108 A, u the IP address 192.168.2.240 for Gigaset WLAN Repeater 108 B.

Gigaset WLAN Repeater 108 A

((( ))) (((

)))

Internet

((( )))

)))

Gigaset WLAN Repeater 108 B

(((

ìOnce you have completed the settings for your local network, click on Next >.

28