Siemens 108 all, admin, admin, New password, Confirm new password, Enter a new password in the, ìIn the Administration menu, select System Password

Administration

System Password

You can assign a System Password for the configuration environment of your Gigaset WLAN Repeater 108, and specify the period after which a session is to end automatically if no further entry is made.

Note:

Only one connection to the configuration environment can be started at any one time.

ìIn the Administration menu, select System Password.

After installation, the Gigaset WLAN Repeater 108 configuration is protected by the System Password admin. To prevent unauthorised changes to the configuration, you should change the System Password. You may have already set a System Password when setting up the Security Setup Wizard. If so, you can change it here.

ìEnter the current System Password in the Current password field.

ìEnter a new password in the New password field, and repeat it in the Confirm new password field.

The password may contain up to 20 characters. The password is case sensitive. Avoid proper names and words that are too obvious. Use a combination of letters, numbers and special characters.

Please note:

If you ever forget your System Password, you will have to reset your Gigaset WLAN Repeater 108 (see page 11). Please bear in mind that this will restore all the settings to the factory configuration. The password is reset to the default setting admin.

66