Security Setup Wizard

Please note:

uIf you have reset the encryption, it is very important that you make a note of the key or the passphrases. You will need this information to configure the wireless network adapters properly.

uWhen you have completed the Security Setup Wizard, you must also set the WEP encryption in other components of your wireless network.

ìTo go to the next step in the Security Setup Wizard, click on Next >.

Access control within the wireless network

This screen only appears in Repeater or access point Operating Mode.

This step allows you to determine which PCs should have wireless access to the Gigaset WLAN Repeater 108. The access control is based on the MAC address of the PCs' network adapters. You can enter the MAC addresses for the PCs manually or select them from the list of PCs that are currently logged in.

Note:

The access control setting is only valid for wireless access of PCs to the repeater or access point. If you use a router in your wireless network and have configured access control there for PCs, you must also set this access control on the repeater.

The default setting for access control is disabled. This means that all PCs using the correct SSID and the correct encryption can log in.

ìNext to MAC address filter select the option On to activate the MAC filtering.

42