Siemens 108 Click on, encryption, encryption, Please note:, This takes you to the, You should now make the settings for network security

Basic Setup Wizard

You should now make the settings for network security.

ìClick on Finish. The basic settings you have made are saved.

ìThis takes you to the Security Setup Wizard, which is described from page 35 onwards.

ìIf you want to make the security settings later, you can deactivate the relevant option and then click on Finish.

If you have changed the default settings the device is restarted.

Please note:

uIf you wish to connect to an access point, on which the encryption of data is acti- vated, after running the Basic Setup Wizard go straight to the Security Setup Wiz- ard and enter the same data for encryption.

uIf you do not immediately run the Security Setup Wizard for an access point with encryption, or if the keys or the type of encryption do not match, the PC cannot establish a connection to your Gigaset WLAN Repeater 108. This is because there is no accessible DHCP server, or the PC and repeater do not have static IP addresses. In this case, you must reset the Gigaset WLAN Repeater 108 to the factory settings (see section "Reset" on page 11) and run the Basic Setup Wizard again.

uThe access point with which the Gigaset WLAN Repeater 108 is to communicate must be ready for use before the PC, games console or the set-top box to which the Gigaset WLAN Repeater 108 is to be connected is booted up.

uThe appendix contains an example of basic settings for wireless connection of games consoles and set-top boxes (see page 80).

34