Siemens 108 Add, Note:, Delete, MAC address, Device name, Permitted clients, MAC address filter, Entering PCs manually:, Configuring the Advanced Settings

Configuring the Advanced Settings

Permitted clientsOnly Access Point and Repeater operating mode

In this screen you can specify which PCs will have wireless access to the Gigaset WLAN Repeater 108 and hence to your LAN.

Note:

The access control setting is only valid for wireless access from the PC to the repeater or access point. If you use a router in your wireless network and have configured access control there for PCs, this must also be set on the repeater.

ìIn the Wireless Network menu, select Allowed Clients.

The default setting for access control is disabled. This means that all PCs that use the correct SSID can register.

The access control is based on the MAC addresss of the PCs' network adapters.

ìActivate access control via the On option in the MAC address filter field.

Entering PCs manually:

ìEnter the required PCs with MAC address and Device name in the appropriate fields.

ìClick on the Add button to add the entry to the list.

ìClick on the Delete button to delete the entry from the list.

ìApply the settings by clicking OK.

61