optiClient phone User Interface Nur für den internen Gebrauch
A31003-G2540-A100-3-76A9, 04/2003
4-6 optiClient 130 V4.0, User Manual
4bof.fm
General Operation
4.2.3 Special Tone Settings
Besides the speaker and microphone volumes, you can also change the "ring volume", "ring
tone" and the "attention ring volume". You can make these settings when you are not conduc-
ting a call.
4.2.4 Headset
Activating / Deactivating the headset
Key Procedure
Click on the "+" or "-" symbol of the speaker key.The following appears on
the display:
Telephone Settings
Ring volume?
You can use the arrow keys that appear in the display to scroll between the
tone settings for the ring volume, ring tone or the attention ring
volume. To confirm your selection, click the confirmation key (check mark)
in the display
You can then click on the "+" or "-" symbol of the speaker key again to
change the corresponding setting. The current setting is saved on clicking
the confirmation key.
Key Procedure
Click on the headset key to activate/deactivate a headset. The headset key informs
you whether the headset is active (connector closed) or inactive (connector open).
>If no headset has been configured for use with the optiClient, the headset key will
not appear.