Siemens 500 Startup, Unpacking the Box, Setting Up the Telephone, Keypad and Control Panel

Startup

Unpacking the Box

3 Startup

3.1Unpacking the Box

Before unpacking the telephone, check the box to see if there is any visible damage caused during transport. Then open the box and check its contents to make sure they are complete and undamaged.

3.2Setting Up the Telephone

Due to the many different kinds of varnishes and polishes used on furniture, the possibility of housing components being damaged or leaving unsightly marks cannot be completely ruled out. Siemens does not assume any liability for any damage associated with where the tele- phone set is mounted.

When setting up the telephones, make sure that they are not exposed to direct sunlight and are not in the direct vicinity of a heat source.

3.3Keypad and Control Panel

Labeling space

Numeric/dialing keys

Plus/minus keys

Function/name keys with LED

Label

(covered by handset)

Dialog keys

Figure 3-1 Keypad and control panel (optiPoint 500 standard)

P31003-E8400-A100-3-7620	3-1
Service Manual