Siemens 500 IP Adapter, if the connection to the LAN is cleared down, Fault signaling

IP Adapter

Administration Via the Web Browser

>The configuration data entered (IP address) is retained by the IPadapter even:

●if the connection to the LAN is cleared down

●if the optiset E local power supply crashes

●if the UP0/E telephone is disconnectedNote:

The IPadapter/UP0/E telephone automatically goes back into operation as soon as LAN crashes/malfunctions are repaired.

The IPadapter is ready for operation as soon as it is plugged back in or relocated on the LAN; no additional administration/configuration is required.

The login procedure with password entry and authentication is performed by an en- cryption algorithm to guarantee LAN security.

The local power supply unit required for operation is identical to the 3 power supply units supplied for the optiset E telephones (FRG/IM; UK and US).

Fault signaling:

Depending on the type of fault, an error message describing the fault that occurred appears when an incorrect entry is made in the web page (see the following example).

Error example:

An incorrect phone number ("123abc") was entered.

The submitted data contained an error:

yInvalid Phone number: 123abc

WARNING -

Changing any of these parameters will require to

subsequently restart the terminal to activate the new values

CorNet TC parameters

Phone number:

CorNet TC login password: 123456 (optional)

Operation mode: phone-side

Options are:

yphone-side

ysystem-side

Submit

Reset

Return to Administrator settings Home

The following error message may appear on every web page in which parameters can be changed. The administrator is informed if no parameters can be modified.

7-6	P31003-E8400-A100-3-7620
	Service Manual