Siemens optiPoint 500 acoustic adapter, Option Adapters and Ports, basic, standard, advance

Option Adapters and Ports

optiPoint 500 acoustic adapter

5.2optiPoint 500 acoustic adapter

>A local power supply unit is required when using the acoustic adapter.

You can connect the following to this adapter:

●External speakers and desk microphone over Y cable,

●Cord-connected headset (121 TR9-5) or

●Cordless headset

(121 TR 9-5*) with call acceptance/cleardown function from mobile units,

●Floating contact

to busy display/door opener and secondary bell/visual paging with own power supply.

It is intended for use with the following systems:

	basic	standard	advance
Hicom150 E/150 H	●	●
HiPath AllServe 150	●	●
HiPath 3000	●	●	●
Hicom 300 H/300 E	●	●	●
HiPath 4000	●	●	●
Note on the advance Model

This model has an integrated headset port on the underside of the device.

Notes on the acoustic adapter

●When using an external microphone and an external speaker, the internal components are switched off in speakerphone mode (sense lead).

●The type of telephone determines the handsfree operation. Microphones which are con- nected to the acoustic Adapter will not be supported by optiPoint 500 basic. Except for call signaling, external devices have priority over internal devices.

●In the mute audio function, the internal microphone, the transmitter insets, and a micro- phone connected to the acoustic adapter are switched to mute.

5-4	P31003-E8400-A100-3-7620
	Service Manual