Siemens 500 Telephone Tests, Startup, Accessing the Telephone Test, Code, Menu text, number

Startup

Telephone Tests

3.6Telephone Tests

Accessing the Telephone Test

The telephone test is started by pressing the "service key" and entering the "code number".

●Tests run for approx. 10 s. These are followed by a timeout.

●Tests can be stopped at any time by pressing the pound key .

Code	Menu text	Action after pressing OK
number
91	LED	Start the LED test
92	Screen	Start the screen tests
93	Keys	Start the key test
94	Audio	Go to the audio test/submenu
941	Speaker	Test the speaker volume (7 levels)
942	Handset	Test the handset volume (7 levels)
943	Ringer volume	Change the ringer volume (7 levels)
944	Ringer pitch	Change the ringer pitch (7 levels)
945	Alerting tone	Change the volume of the alerting tone (7 levels)
946	Speakerphone mode	Handsfree function (3 levels):
		normal, loud, noisy room
940	Back	Return to the audio test
95	Asset ID	Display the asset ID
96	Software version	Display the telephone SW version
97	Feeding range	Start the feeding range test
90	Back	Return to the telephone test
Table 3-1	Telephone test for HiPath 4000/Hicom 300 H

optiPoint 500 Models with Display (economy, basic, standard and advance)

●You can browse and display individual tests in the Service menu.

●Display individual call numbers

●Activate LEDs and calls.

●Display showing if power supply is sufficient

– if sufficient power is being supplied, a light grey pixel pattern is visible

3-4	P31003-E8400-A100-3-7620
	Service Manual