Manuals / Siemens / Lawn and Garden / Portable Generator

Siemens 500 service manual Electrical Requirements of the Headset, Pin assignment Headset MW 8/8

Models: 500

1 120

Download 120 pages 55.13 Kb

Page 52

Option Adapters and Ports optiPoint 500 acoustic adapter

Desk Microphone:
Input level -50 dBm:	-12 dBm PCM signal
Input resistance:	150k parallel with 220 nF in series with 36K
Sense lead to GND:	Internal microphone deactivated

Pin assignment Headset: MW 8/8

Pin 1	Pin 2	Pin 3	Pin 4	Pin 5	Pin 6	Pin 7	Pin 8

TX	GND	TX_AUD	RX_AUD	RX_AUD	TX_AUD	-	RX_BUS

The electrical values comply with FTZ 121TR9-5.

Pin assignment Floating contact: MW6/6

Pin 1	Pin 2	Pin 3	Pin 4	Pin 5	Pin 6

NA	ACT1	RING	RING	ACT2	NA

5.2.1Electrical Requirements of the Headset

●The electrical values comply with FTZ 121TR9-5

●Audio transmission from one headset is routed to the other headset (recommended by Plantronics).

●The way in which this option interacts with the telephone and the CS is described by the CorNet-TS layer 3 specification for Symphony.

The CS can detect a headset after it has been plugged into this option.

●Microphone (Elektret interface):

Max. current:	≤ 400 ∝A
Supply voltage:	5 V±10%
Series resistance:	5 kΩ±10%

●Audio converter:

Impedance:	150 Ω±10%
EBD:	13 dB±2.5dB

5-6	P31003-E8400-A100-3-7620
	Service Manual

Image 52

Siemens service manual Electrical Requirements of the Headset, Option Adapters and Ports optiPoint 500 acoustic adapter

Contents

Key Modules, Adapters, Accessories Service Providers P31003-E8400-A100-3-7620optiPoint System-Specific Telephones 1PP31003-E8400-A100-3-7620 1 General Service Information Contents3 Startup 8 Troubleshooting 9 Ordering InformationP31003-E8400-A100-3-7620 P31003-E8400-A100-3-7620 Figures P31003-E8400-A100-3-7620 Tables P31003-E8400-A100-3-7620 1 General Service Information 1.1 Service Concept1.2 Safety Information General Service Information1.3 Safety Symbols General Service Information4 Electrostatically sensitive devices Using Personal Data Helpful suggestionsGuidelines for Using Data General Service InformationConscious action helps maintain data protection and data security General Service Information Safety Symbols2 Product Description Product DescriptionoptiPoint 500 telephones economy2.1 optiPoint 500 Features at Hicom/HiPath Features when Connecting to Hicom and HiPathAdditional Features when Connecting optiPoint 500 to HiPath Product DescriptionProduct Description 2.2 Configuration NotesModules Add-On Components and Adapters 2.3 Telephones 2.3.1 optiPoint 500 entry Product DescriptionControls Connectivity2.3.2 optiPoint 500 economy Product DescriptionControls Connectivity2.3.3 optiPoint 500 basic Product DescriptionControls Connectivity2.3.4 optiPoint 500 standard Special FeaturesProduct Description Controls2.3.5 optiPoint 500 advance Special FeaturesProduct Description ControlsConfiguration Notes 2.4 Module OptionsProduct Description Product Description 2.4.1 optiPoint 500 key module2-10 2.4.2 Busy Lamp Field BLF 2.4.2.1 Power SupplyProduct Description 2-11Product Description Module Options Figure 2-6 Power supply to BLF2-12 2.4.2.2 Connection to the Terminal Product Description2-13 Interface Description MW8/8 RJ45 Product Description2-14 2.4.3 optiPoint 500 signature module HiPath 4000 only Product DescriptionI2C Bus Memory Cards 2-152.5 Accessories 2.5.1 External Speaker/Desk Microphone Product DescriptionDesk Microphone optiset E External Speaker2.5.2 optiPoint Headsets Connecting the Headset to an 121TR9-5 InterfaceProduct Description Headset2.5.3 Local Power Supply Unit Primary/Client Configuration see Section 5.5 on pageProduct Description Name2.5.4 Accessory Pack 2.5.5 Online Key Labeling Tool2.5.6 Wall Mounting Product Description2.6 Technical Data 2.6.1 Asset ID 2.6.2 Environmental ConditionsAmbient temperature Product Description2.6.3 Ranges 2.6.4 UP0/E Interface2.6.5 USB 1.1 Interface Product DescriptionProduct Description Technical Data2-22 3.2 Setting Up the Telephone 3 Startup3.1 Unpacking the Box 3.3 Keypad and Control Panel3.4 Date and Time Indicator Date and Time IndicatorStartup Keypad PollingStartup 3.5 Ports on the Underside of the TelephonePorts on the Underside of the Telephone 3.6 Telephone Tests Accessing the Telephone TestStartup CodeStartup Test Function Not WorkingHiPath 4000/Hicom 300H optiPoint 500 telephoneStartup Because the optiPoint 500 advance has more function keys 4 + 15 than all optiset E tele- phones max. 4 + 8, the system generates an optiset E advance plus/comfort with optiset E key module for the optiPoint 500 advance. This combination is also recognized by HiPath 3000 Manager E/Hicom Assistant E OfficeFigure 3-3 optiPoint 500 entry, economy block diagram 3.7 Block DiagramsStartup Figure 3-4 optiPoint 500 basic, standard and advance block diagram Startup4 Private Network Termination Units HiPathHicom Private Network Termination Units4.1 PNT Private Network Termination 4.2 PNT E Private Network Termination4.3 PNT Q Private Network Termination 4.4 Distance Adapter UCON S and M at Hicom 300/300 E and HiPathOption Adapters and Ports 5 Option Adapters and PortsComparison of optiset E Adapters and optiPoint Option Adapters Option Adapters and Ports Configuration Notes Option Adapters and Ports 5.1 Adapter SlotsAdapter Slots 5.2 optiPoint 500 acoustic adapter Option Adapters and PortsYou can connect the following to this adapter It is intended for use with the following systemsOption Adapters and Ports Y cable MW8/8Floating contact MW6/6 Headset MW8/8 RJ455.2.1 Electrical Requirements of the Headset Option Adapters and Ports optiPoint 500 acoustic adapterPin assignment Headset MW 8/8 Pin assignment Floating contact MW6/6Option Adapters and Ports 5.2.2 Floating ContactsContact Load 5.3 optiPoint 500 Analog Adapters Option Adapters and PortsoptiPoint 500 Analog Adapters RJ11Option Adapters and Ports Analog InterfaceStandard analog interface for analog telephones cordless telephones The adapter does not support the following functions5.4 optiPoint 500 ISDN Adapter Option Adapters and PortsRJ45 Functions5.5 optiPoint 500 Phone Adapter Host/Client Option Adapters and PortsRJ11 Functional Description5.6 optiPoint 500 recorder adapter Option Adapters and PortsInterfaces Interface DescriptionOption Adapters and Ports optiPoint 500 recorder adapter Recorder port MW 6/4Electrical Requirements 5-13Option Adapters and Ports Connection ExampleClient Host5.7 Port Overview Option Adapters and Ports5-15 PhoneOption Adapters and Ports 5-16Akustik Signature6.1 CallBridge TU 6 CallBridgeCallBridge 6.2 CallBridge for Data CallBridgeIP Adapter Administration 7 IP AdapterIP Adapter 7.1 optiPoint IPadapter Installation optiPointoptiPoint IPadapter7.2 Connection to the Terminal IP Adapter7.3 Connection to the System IP AdapterHicom optiPoint7.4 Administration Via the Web Browser Administration Via the Web BrowserIP Adapter Structural overviewFault signaling Error exampleIP Adapter if the connection to the LAN is cleared downoptiPoint IPadapter Tel IP AdapterLeads to Administration page optiPoint IPadapter administrator loginThe optiPoint IPadapter web server allows the administrator to via Administrator Login if necessaryAdministration IP AdapterGeneral information MAC addressIP Adapter BIOS contains the initialization software and factory test7-10 8. Click “IP address and routing” and enter the following addresses IP Adapter7-11 If more than 24 characters are input, the following message appears IP Adapter7-12 Reset Return to Administrator settingsIP Adapter 7-13Default Options are y No transfer y Upload configurationy Download configuration y Download application y Upload history IP AdapterDefault Cause of faultFault description IP AdapterThe submitted data contained an error Invalid new password IP AdapterLoad download from fileserver application 7-16Load download from fileserver configuration Save upload to fileserver configurationIP Adapter 7-17Save upload to fileserver configuration IP AdapterHistory file 7-18Return to Administration IP Adapter7-19 Restart terminalDiagnostics IP Adapter7-20 Invoke testsChange administrator password Current admin password New password Confirm new passwordReset IP Adapter7.5 Administration via optiPoint Fault signalingIP Adapter 7-22Ping to Gateway failed Ping to Partner failedIP Adapter Figure 7-6 Error codes for configuration settings7-24 IP Adapter To perform administration via the telephone, proceed as follows7-25 Password Password Abort?Password PasswordTC Login password? IP Adapter7-27 DHCP?enable? disable?IP Adapter Example “DHCP Input”Page IP Adapter Example Mode InputOperation mode phone-side?7.6 Configuration Examples Configuring the IPadapter at HicomIP Adapter 7-31HG 1500 cannot be configured via the WEB interface Figure 7-7 WEB access to the IPadapterIP Adapter optiPoint side3. Click Administration. The administrator password must be entered The IP address, default gateway, etc. are set hereFigure 7-8 WEB page administration IP Adapter4. Enter the following addresses IP Adapter7-34 Configuration in HG 1500 and Office Settings in Assistant OfficeIP Adapter 7-35IP Adapter Configuring the IPadapter at Hicom7-36 3. Click Administration. The administrator password must be entered The IP address, default gateway, etc. are set hereFigure 7-12 WEB page administration IP AdapterIP address, subnet mask, IP partner address and default gateway IP Adapter4. Enter the following addresses Partner IP address the IPadapter IP ad- dress in this case phone-sideConfiguring the optiPoint IPadapter on the optiset E IP Adapteroptiset E 7-39IP Adapter Configuration Examples7-40 8 Troubleshooting 8.2 Reboot8.1 Test Loops 3 and TroubleshootingTroubleshooting Reboot9 Ordering Information 9.1 Products and Spare PartsOrdering Information NameOrdering Information NameColor Part Number9.1.2 Accessories, Spare Parts, Miscellaneous Ordering InformationName ColorOrdering Information Accessory pack for advance Accessory pack for BLFAccessory pack for general optiPoint Ordering Information9.2 Documentation Ordering InformationName Reference number9.3 Order Addresses Ordering InformationProduct Company Address9.4 After-Sales Service and Repair Ordering InformationProduct Company Address9.5 Intranet Addresses Ordering InformationIntranet Addresses SubjectIntranet Addresses Ordering Information9-10 Abbreviation AbbreviationsDefinition Abbreviation DefinitionIndex