Siemens HG2425UC, HG2528UC manual Changing the Oven Temperature When Using the Probe

Changing the Oven Temperature When Using the Probe

Changing the Probe Temperature

Operation - Oven

3.Press COOKING MODE and select BAKE, CONVECTION BAKE or CON-

VECTION ROAST.

4.Press START. The default oven temperature will appear.

5.Turn knob to change oven temperature if necessary.

6.Touch START.

7.Turn knob to set the probe temperature (desired end temperature of the food).

8.Press START.

The chosen oven temperature is displayed in the upper right hand corner of the display.

The probe temperature is displayed in the center to the left of the cooking mode. It starts at 80 degrees and increases in 5°F increments until the chosen probe tem- perature is reached.

The oven is preheated when the beep signals once.

When the set probe temperature is reached, END appears in display and oven turns off.

1.Touch TEMPERATURE. Oven temp will flash in the display.

2.Turn the knob to desired temperature and press START twice.

1.Touch TEMPERATURE. The oven temperature will flash.

2.Press START and PROBE TEMP will flash.

3.Turn the knob to desired temperature and press START again.

Note: Always remove probe from oven when cooking is complete. The probe symbol will remain in the display until the probe is removed. Do not leave probe attachment in oven during self-clean. Oven will not self-clean with the probe installed in the oven

English 23