
AirCard 710/750 Network Card Installation Guide
Note: Depending on your AirCard configuration, the User Profile window may or may not have an Advanced button. If the button is not displayed, there is no need to enter an IP address or DNS address(es).
User Name and
4.If you want to have a GPRS packet data session established whenever you are using this profile and whenever you are in GPRS coverage, then select Auto Connect.
5.If your account information includes an IP address or DNS address(es), click the Advanced button.
6.If your service provider gave you a specific IP address for your AirCard, then select “Use static IP address”, and type the address. (Usually, you should select “Use dynamic IP address“.)
7.If your service provider is using data compression and/or header compression, then select the checkbox(es) for the feature(s) that your service provider supports.
8.If your service provider gave you values for Primary DNS and Secondary DNS , then:
a.Click the DNS tab at the top of the window.
b.Enter the values into the corresponding fields.
c.Click OK.
9.Click OK until you return to the main Watcher screen. The AirCard is now ready for use.
Pocket PC 2002
To enter your account information into Watcher:
1.If Watcher is not running, start Watcher, by selecting Start >
Programs > AirCard 710 or 750 Watcher
If you have a valid SIM card and are in an area that has GPRS coverage, a screen asking you to “Configure a pro- file now?” is displayed. Tap Yes.
If instead the main Watcher screen is displayed, this means that you don’t have a valid SIM card or you are not in an area that has GPRS coverage or your AirCard was pre- configured. Tap Tools > Options to access the Profiles tab of the Options screen.
2.Tap Add.
|
|
|
|
|
|
|
24 |
|
|
|
|
| 2130135 |
|
|
|