Sierra Wireless AirCard 750, AirCard 710 manual Changing the Interrupt

AirCard 710/750 Network Card Installation Guide

	9.	Click Close to close the Network Properties window.
	10.	If you are prompted to restart your PC, click Yes.
Note: You must restart your PC
to complete the installation.		Otherwise restart your PC from the Start menu.
	11.	When the PC restarts, re-install your Service Pack.
	On completion of this step, the modem driver is installed and
	you can proceed to configure the AirCard to use your account
	(if it was not pre-activated). See the section “Account Configu-
	ration Procedures” on page 23.

Changing the Interrupt

If the message, “Communication Failed!…” occurs when you start Watcher, a possible reason is that you have assigned an interrupt to the AirCard that has also been assigned to another device.

To change the interrupt assigned to the AirCard:

1.Open the Control Panel by selecting Start > Settings > Control Panel.

2.Double click the Network icon.

3.Select the Adapters tab.

4.Select Sierra Wireless AirCard GPRS Adapter and click the Properties… button.

5.Use the drop-down list to change the Interrupt to another number and click OK.

6.Close the Network window by clicking the Close button.

7.Restart your PC.

8.If the AirCard still does not function properly, repeat the procedure, selecting a different interrupt.

18 2130135