22 Computer Installation
22.1 System Requirements
Operating System: | Windows® 98SE, Me, 2000, XP or Vista |
CPU: | Pentium III 500 MHz or above |
RAM: | 64MB RAM (128 MB is recommended) |
Hard Drive: | 50 MB of free memory |
Interface: | USB 2.0 (compatible with USB 1.1) |
CD ROM Drive: | Yes, if the operating system is Windows 98 SE |
|
|
22.2 Connecting to the Computer
Lift the protective lid on the front of the device and connect the camera as shown in the following images:
1.Insert the small plug (mini USB) of the connection cable into the camera’s USB socket 
.
2.Insert the large end of the connection cable into a free USB socket on your computer.
Note:
If you use a USB hub (a multiple USB port adaptor), it is possible that your computer does not recognize the camera. In this case, connect the USB cable directly to your PC.
22.3 Driver Installation
To transfer your photos, videos or voice recordings to a computer with Microsoft Windows ME, 2000, XP or Vista, you do not need to manually install a driver. The device is set up the first time it is used. For more information, see the paragraph “Transferring Photos, Videos and Voice Recordings” on page 39.
If you want to use your camera as a webcam or video camera on a computer with Microsoft Windows ME, 2000, XP or Vista, then you must manually install the driver. This is described below for Windows Vista, Windows ME, 2000, XP, and Windows 98SE.
35
