Sipura Technology SPA-2000 manual Upgrade Parameters, Protocol Parameters

Resync On Reset	Resyncs configuration profile from configuration server	Yes
	whenever the SPA-2000 resets.
Resync Random	Spread interval for resync requests	2
Delay
Resync Periodic	Resyncs configuration profile periodically after reset.	3600
Resync Error	Retry interval following resync failure	3600
Retry Delay
Resync From SIP	Enables resync of configuration profile from a SIP command.	Yes
Profile Rule	Configuration profile URL script.	/spa.cfg
Log Resync	Syslog message generated when attempting a resync
Request Msg
Log Resync	Syslog message generated after a successful resync
Success Msg
Log Resync	Syslog message generated after a failed resync
Failure Msg
GPP A	General purpose parameter	empty
GPP B	General purpose parameter	empty
GPP C	General purpose parameter	empty
GPP D	General purpose parameter	empty

Note: In a customized SPA-2000, the profile rule would point to a service provider’s server.

3.4.3. Upgrade Parameters

Parameter Name	Description	Default
Upgrade Enable	Master enable for firmware upgrade operations	Yes
Upgrade Error	Retry interval following upgrade failure	3600
Retry Delay
Upgrade Rule	Upgrade script.	empty
Log Upgrade	Syslog message generated when attempting an upgrade
Request Msg
Log Upgrade	Syslog message generated after a successful upgrade
Success Msg
Log Upgrade	Syslog message generated after a failed upgrade
Failure Msg

Note: In a customized SPA-2000, the upgrade rule would point to a service provider’s server.

3.4.4.Protocol Parameters

Parameter Name	Description		Default
Max Forward	SIP Max-Forward value. Range: 1 – 255		70
Max Redirection	Number of times to allow an INVITE to be redirected by a 3xx		5
	response to avoid an infinite loop.
	Note: This parameter currently has no effect: there is no limit on number of
	redirection.
Max Auth	Maximum number of times a request may be challenged (0-255)		2
SIP User Agent	User-Agent Header to be used by the unit in outbound requests.		Sipura/
Name	If empty, the header is not included.		$version
SIP Server Name	Server Header to used by the unit in responses to inbound		Sipura/
	responses. If empty, the header is not included.		$version
© 2003 Sipura Technology, Inc		Proprietary (See Copyright Notice on Page 2)	20