profile parameters. The parameter group that the User can access is specified by the Administrator, which can only be done through provisioning the
To access the Administrator level privilege, use the following URL: http://IP_Address_Of_SPA/admin/. If the password has been set for Administrator, the browser will prompt for Administrator authentication. The username for Administrator is “admin” and cannot be changed.
To access the User level privilege, use URL: http://IP_Address_Of_SPA/. If the password has been set for User, the browser will prompt for User authentication. The username for User is “user” and cannot be changed.
When browsing Administrator pages, one can switch to User privileges by clicking the link “User Login”. (Note: if User password was set, the browser will prompt for User authentication when you click the “User Login” link). Conversely, from the User pages you can switch to Administrator privilege by clicking the link “Admin Login.” Authentication is needed if the Administrator password has been previously set.
Warning: Switching between the User and Administrator will discard the uncommitted changes that have already been made on the web pages.
3.3.3. Basic and Advanced Views
The web configuration interface provides a Basic and an Advanced view from which the various configuration parameters can be accessed. The SPA Provisioning tab is only visible from the Advanced Administrator view of the web interface.
Warning: Switching between the basic and advanced view will discard the uncommitted changes that have already been made on the web pages.
© 2003 Sipura Technology, Inc | Proprietary (See Copyright Notice on Page 2) | 11 |
