Sipura Technology SPA-2000 manual User 1 and User 2 Parameters

3.4.5.4.Dial Plan

Parameter Name	Description	Default
Dial Plan	Per-line dial plan script	See below
Enable IP Dialing	Enable IP Dialing	no

Default Dial Plan script for each line: “(*xx[3469]11000[2-9]xxxxxx1xxx[2-9]xxxxxxxxxxxxxxxxxx.)” Explanation of Default Dial Plan:

Dial Plan Entry	Functionality
*xx	Allow arbitrary 2 digit star code
[3469]11	Allow x11 sequences
0	Operator
00	Int’l Operator
[2-9]xxxxxx	US "local" number
1xxx[2-9]xxxxxx	US 1 + 10-digit long distance number
xxxxxxxxxxxx.	Everything else (Int’l long distance, FWD, ...)

Note: If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by entering “*”, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are optional. If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is enabled.

3.4.5.5.Polarity Settings

Parameter Name	Description	Default
Idle Polarity	Polarity before call connected	Forward
Caller Conn Polarity	Polarity after outbound call connected	Reverse
Callee Conn Polarity	Polarity after inbound call connected	Reverse
Notes:

3.4.6. User 1 and User 2 Parameters

User 1/2 refers to the subscriber of Line 1/2. When a call is made from Line 1/2, SPA shall use the user and line settings for that Line; there is no user login support in SPA v1.0. Per user parameter tags must be appended with [1] or [2] (corresponding to line 1 or 2) in the configuration profile. It is omitted below for readability.

3.4.6.1.Call Forward And Selective Call Forward/Blocking Settings

Parameter Name	Description		Default
© 2003 Sipura Technology, Inc		Proprietary (See Copyright Notice on Page 2)		26