Sipura Technology SPA-2000 manual SIP T1

SIP Accept Language	Accept-Language Header to be used by the unit.
	If empty, the header is not included.
Remove Last Reg	Remove last registration before registering a new one if value is	no
	different one.
SIP T1	RFC 3261 T1 value (RTT Estimate). Range: 0 – 64 sec	.5
SIP T2	RFC 3261 T2 value (Maximum retransmit interval for non-INVITE	4
	requests and INVITE responses). Range: 0 – 64 sec
SIP T4	RFC 3261 T4 value (Maximum duration a message will remain in	5
	the network). Range: 0 – 64 sec
SIP Timer B	INVITE time out value. Range: 0 – 64 sec	32
SIP Timer F	Non-INVITE time out value. Range: 0 – 64 sec	32
SIP Timer H	INVITE final response time out value. Range: 0 – 64 sec	32
SIP Timer D	ACK hang around time. Range: 0 – 64 sec	32
SIP Timer J	Non-INVITE response hang around time. Range: 0 – 64 sec	32
INVITE Expires	INVITE request Expires header value in sec. 0 = do not include	180
	Expires header in INVITE. Range: 0 – (231 – 1)
ReINVITE Expires	ReINVITE request Expires header value in sec. 0 = do not	30
	include Expires header in the request. Range: 0 – (231 – 1)
Reg Min Expires	Minimum registration expiration time allowed from the proxy in	1
	the Expires header or as a Contact header parameter. If proxy
	returns something less this value, then the minimum value is
	used.
Reg Max Expires	Maximum registration expiration time allowed from the proxy in	7200
	the Min-Expires header. If value is larger than this, then the
	maximum value is used
Reg Retry Intvl	Interval to wait before the SPA retries registration again after	30
	encountering a failure condition during last registration
SIT1 RSC1	SIP response status code to INVITE on which to play the SIT1
	Tone
SIT2 RSC1	SIP response status code to INVITE on which to play the SIT2
	Tone
SIT3 RSC1	SIP response status code to INVITE on which to play the SIT3
	Tone
SIT4 RSC1	SIP response status code to INVITE on which to play the SIT4
	Tone
Try Backup RSC	SIP response status code on which to retry a backup server for
	the current request
Retry Reg RSC	Interval to wait before the SPA retries registration again after	30
	encountering a failure condition during last registration
RTP Port Min2	Minimum port number for RTP transmission and reception	16384
RTP Port Max2	Maximum port number for RTP transmission and reception	16482
RTP Packet Size	Packet size in sec. Valid values must be multiple of 0.01s.	0.02
	Range: 0.01 – 0.16

Notes:

1.Reorder or Busy Tone will be played by default for all unsuccessful response status code

2.<RTP Port Min> and <RTP Port Max> should define a range that contains at least 4 even number ports, such as 100 – 106

3.4.4.1.Dynamic Payload Types

Parameter Name	Description	Default
© 2003 Sipura Technology, Inc	Proprietary (See Copyright Notice on Page 2)		21