Ring 1 Caller | Caller number pattern to play Distinctive Ring/CWT 1 |
|
Ring 2 Caller | Caller number pattern to play Distinctive Ring/CWT 2 |
|
Ring 3 Caller | Caller number pattern to play Distinctive Ring/CWT 3 |
|
Ring 4 Caller | Caller number pattern to play Distinctive Ring/CWT 4 |
|
Ring 5 Caller | Caller number pattern to play Distinctive Ring/CWT 5 |
|
Ring 6 Caller | Caller number pattern to play Distinctive Ring/CWT 6 |
|
Ring 7 Caller | Caller number pattern to play Distinctive Ring/CWT 7 |
|
Ring 8 Caller | Caller number pattern to play Distinctive Ring/CWT 8 |
|
Default Ring | Default ringing pattern, 1 – 8, for all callers | 1 |
Default CWT | Default CWT pattern, 1 – 8, for all callers | 1 |
Hold Reminder Ring | Ring pattern for reminder of a holding call when the phone is on- | None |
| hook |
|
Call Back Ring | Ring pattern for call back notification | None |
Cfwd Ring Splash | Duration of ring splash when a call is forwarded | 0 |
Len2 | (0 – 10.0s) |
|
Cblk Ring Splash | Duration of ring splash when a call is blocked (0 – 10.0s) | 0 |
Len2 |
|
|
VMWI Ring Splash | Duration of ring splash when new messages arrive before the | .5 |
Len | VMWI signal is applied (0 – 10.0s) |
|
Notes:
1.Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest match) will be used for alerting the subscriber.
2.Feature not yet available.
3.4.7. Regional Parameters
3.4.7.1.Call Progress Tones
Parameter Name | Description |
|
| Default |
|
Dial Tone1 | Played when prompting the user to enter a phone |
|
| ||
| number |
|
| 19;10(*/0/1+2) |
|
Second Dial Tone | An alternative to <Dial Tone> when user tries to dial a 3- |
|
| ||
| way call |
|
| 19;10(*/0/1+2) |
|
Outside Dial Tone1 | An alternative to <Dial Tone> usually used to prompt the |
|
| ||
| user to enter an external phone number (versus an |
|
|
| |
| internal extension). This is triggered by a “,” character |
|
|
| |
| encountered in the dial plan. |
|
|
| |
Prompt Tone1 | Played when prompting the user to enter a call forward |
|
| ||
| phone number |
| 19;10(*/0/1+2) |
| |
Busy Tone | Played when a 486 RSC is received for an outbound call |
|
| ||
|
|
|
| 19;10(.5/.5/1+2) |
|
Reorder Tone1,2 | Played when an outbound call has failed or after the far |
|
| ||
| end hangs up during an established call |
| 19;10(.25/.25/1+2) |
| |
Off Hook Warning | Played when the subscriber does not place the handset |
| 480@- |
| |
Tone2 | on the cradle properly |
| 10,620@0;10(.125/ |
| |
|
|
|
| .125/1+2) |
|
Ring Back Tone | Played for an outbound call when the far end is ringing |
|
| ||
|
|
|
| 19;*(2/4/1+2) |
|
Confirm Tone | This should be a brief tone to notify the user that the last |
| 600@- |
| |
| input value has been accepted. |
| 16;1(.25/.25/1)" |
| |
SIT1 Tone | An alternative to <Reorder Tone> played when an error |
|
| ||
|
|
|
|
|
|
© 2003 Sipura Technology, Inc | Proprietary (See Copyright Notice on Page 2) | 28 |
| ||
