Xantrex Technology XTR 850 WATT SERIES manual Device-Specific Error List

Error Messages

Table B-2	Execution Error List
Error Code		Error Message Description
-222		Data out of range
		Indicates that a legal program data element was parsed but
		could not be executed because the interpreted value was
		outside the legal range as defined by the device (see IEEE
		488.2, 11.5.1.1.5)
-224		Illegal parameter value	B
		Used where the exact value, from a list of possible values, was
		expected.
-291		Out of memory
		Used when the Autosequence programming buffer is full.

Device-Specific Error List

An error in the range [-399, 300] or [1, 32767] indicates that the instrument has detected an error which is not a command error, a query error, or an execution error; some device operations did not properly complete, possibly due to an abnormal hardware or firmware condition. These codes are also used for self-test response errors. The occurrence of any error in the class causes the device-specific error bit (bit 3) in the Event Status Register to be set.

Table B-3	Device-Specific Error List
Error Code		Error Message Description
-300		Device-specific error.
		Indicates that the power supply could not complete the
		operation due to some condition of the power supply.
-350		Queue Overflow
		A specific code entered into the queue in lieu of the code that
		caused the error. This code indicates that there is no room in the
		queue and an error occurred but was not recorded.
-360		Communication error
		This is the generic communication error for devices.
-363		Input buffer overrun
		Software or hardware input buffer on serial port overflows with
		data caused by improper or nonexistent pacing.
-365		Time out error
		This is a generic device-dependent error.

M370046-01 B-5