Xantrex Technology XTR 850 WATT SERIES manual Operation Complete, Wait-to-Continue Command

			Status Byte
Table 5-10Standard Event Status Register
Bit	Bit Weight	Bit Name	Description
5	32	Command Error (CME)	Set if an IEEE488.2 syntax error has been detected
			by the parser, an unrecognized header was received,
			or a group Execute Trigger was entered into the
			input buffer inside an IEEE 488.2 program message.
			See “Command Error List” on page B–3 for a list of
			possible error codes and descriptions.
6	64	User Request (URQ)	Not Implemented
7	128	Power ON (PON)	Not Implemented
8–15	N/A	Reserved	Reserved for possible future use by IEEE.
			Bit values are reported as zero.

Operation Complete

The Operation Complete command causes the power supply to generate the operation complete message in the Standard Event Status Register when all pending operations have been finished. See bit 0 in Table 5-10 for more details.

Command:

*OPC, *OPC?

Wait-to-Continue Command

5

The Wait-to-Continue command prevents the power supply from executing any further commands or queries until the no-operation- pending flag is TRUE.

Command:

*WAI

M370046-01 5-33