Cable Separation and Routing
FCC Information
The satellite antenna cable, FM extender antenna (FEA) cable and cigarette lighter adapter (CLA) power cable must be appropriately separated and routed for your radio to be compliant with federal regulations.
Step 1
The connections on your vehicle dock are clearly marked. Install your vehicle dock and connect the antenna cable into the connection labeled “ANT”, the CLA power cable into the power connection marked “PWR” and the FEA cable into the connection marked “FM OUT”. (See Figure 18.)
Step 2
LEFT
Power FEA
PWR AUDIO
Figure 18
RIGHT
Antenna
It is important that you keep the three cables as separate from each other as possi- ble and that you keep the two antenna cables away from the vehicle dock and from the CLA power cable. The cables must not be bundled together as they exit the dock (see Figure 19, on page 40).
As a guide, you can follow the diagram in Figure 19, adapting the example to suit your own vehicle’s configuration. For example, if you cigarette lighter socket is to the left of the vehicle dock, route the two antenna cables towards the passenger side of the ve- hicle. If your cigarette lighter socket is on the
