3.Refer to Figure 6 and attach the vent mount to a heating/air conditioning vent in your vehicle. Position the two tension springs A against a vent louver B. Then push the vent mount into the vent, far enough so that the hooks C drop down and hook the rear of the vent louver (see Figure 7). Once you are sure that the hooks have grasped a vent louver, the tension springs A will keep the vent mount hooked to the louver.
A B
PUSH 
C
FM OUT | ANT |
D
Figure 6
FM OUT | ANT |
HOOKED
Figure 7
