Slant/Fin installation instructions Jaguar J-390 Direct VENT, Sidewall Venting, Thick Wall

12 Jaguar Model J-390

JAGUAR J-390 - DIRECT VENT, SIDEWALL VENTING

All joints must be liquid and pressure tight. Use 4” dia. PVC/CPVC schedule 40 pipe or U/L listed single wall 4" dia.

AL29-4C S.S.*. venting materials (See page 7).

3" - 14" THICK WALL

4" DIA PVC/CPVC PIPE FOR AIR INTAKE	SLANT/FIN VENT/AIR INTAKE
90°ELBOW	TERMINATION KIT PART # 83 0802 000
4" DIA PVC/CPVC FLUE PIPE

AIR INTAKE LOUVERS

4" DIA PVC/CPVC COUPLING WITH SCREEN

SNOW LINE ** (SEE DEFINITION)

OUTSIDE WALL

Figure 10. Direct vent, sidewall venting illustration; utilizing PVC/CPVC pipe for venting

3" - 14" THICK WALL

4" DIA PVC/CPVC PIPE FOR AIR INTAKE 90°ELBOW

4" DIA STAINLESS STEEL PIPE FOR VENT

ADAPTOR

SLANT/FIN VENT/AIR INTAKE TERMINATION KIT PART # 83 0802 000

TOGETHER WITH SPECIAL KIT FOR STAINLESS STEEL VENT PIPE

AIR INTAKE LOUVERS

4" DIA STRIGHT SCREENED VENT TERMINATION

SNOW LINE ** (SEE DEFINITION)

OUTSIDE WALL

Figure 11. Direct vent, sidewall venting illustration; utilizing stainless steel vent materials for venting.

**Definition of Snow Line: Knowledge of local conditions will reveal the maximum height that repeated snowfalls accumulate to. The height should be used as the SNOW LINE.

* AL 29-4C IS A REGISTERED TRADEMARK OF ALLEGHENY LUDLUM CORP.