Smart Technologies 3000i manual Reconnect the computer 2 serial cable

2Bundle any excess cable, fasten it with the supplied tie wrap, and clip off any excess tie-wrap length.

iCanactceuerfspeetrehaannrycmeifntuthleariftnemtererafnyeiT1csrceeh5asnirsouucesfbedctej,eeheivauecvitnnceFtedddoCe,(cC2stiohni)rmrecTeludfphuloedlioilsliesonp.sdwgeOewripnvaititegcihoretapwnt.miaoorutns t

Rear of Cabinet

Room Control	Tie Wrap
Module

3Partially tighten the four screws that hold the Room Control Module in place. Once all the screws are in position, fully tighten them. Avoid over-tightening the screws.

Screw x 4

Room Control Module

Rear of Cabinet

4Reconnect the computer 2 serial cable.

Rear of Cabinet

Computer 2

Serial Cable

6 Room Control Module Installation Guide for the 3000i 99-00360-02 REV A0