SmartBridges sB3010 manual Remote Router to Remote Bridge, Changing Remote Router to Root Bridge

i n t e l l i g e n t w i r e l e s s p l a t f o r m

Figure 2-11 Changing Remote Router to Root Bridge

2.5.5 Remote Router to Remote Bridge

Follow the steps below to change Remote Router mode to Remote Bridge Mode:

1.Go to Tools System Configuration drop down menu. The System Configuration will be displayed as shown below.

2.Alternatively, click on the Current Device Mode link on the top right hand corner to go to the System Configuration page.

3.Choose Bridge under the Remote Device option.

4.Click on Apply Changes. A confirmation pop-up window will be displayed.

5.Enter IP Address, IP Mask and Gateway for Ethernet Configuration.

6.Enter the MAC address and the SSID of the remote radio.

7.Enter the Channel and Domain.

8.Click on the Apply Changes button to change the settings. The device will be rebooted and set to the chosen operational mode.

.

airHaul™ Nexus User Guide Page 24 of 80