SmartBridges sB3010 manual Radio Operating, Throughput, Optimizer, Enter the Fragment Length

	i n t e l l i g e n t	w i r e l e s s	p l a t f o r m
Page Item	Descriptions
	The radio preamble is a section of data at the head of a packet that
	contains information the Root Device and Remote devices need
	when sending and receiving packets.
	The pull-down menu user to select a long, short or dynamic radio
	preamble. The default is dynamic.
	Long: a long preamble provides stable link
	Short: a short preamble improves throughput performance. But it only
	allows short preamble capable Remotes to be associated.
	Dynamic: a dynamic preamble allows mixing of short and long
	preambles
Radio Operating	sB Enhanced Mode gives better performance with the compression
	option. For this reason, it does not support 802.11b
mode
	The Throughput Optimizer is used to optimize the radio Link speed
	and performance.
	The Valid range is 0 to 10. The default value is 6.
Throughput	Setting a higher value will cause the radio to attempt to establish at
	the highest possible data rate in	an aggressive way. A smaller
Optimizer
	"Throughput Optimizer" value means a more stable link.
	Note: The default value for the Throughput Optimizer is 6. Vary the
	Throughput Optimizer settings to achieve a more stable link.

Follow the steps below to change the Radio Performance:

1.From the Radio Configuration page click on the Performance link.

2.Enter the Fragment Length.

3.Input the desired RTS/CTS Length.

4.Choose the Preamble Settings from the pull-down list.

5.Choose the desired Radio Operating mode

6.Select an appropriate value for the Throughput Optimizer.

7.Click on the Apply Changes button to effect the changes.

airHaul™ Nexus User Guide Page 49 of 80