i n t e l l i g e n t | w i r e l e s s | p l a t f o r m | |
|
|
|
|
|
|
|
|
| Figure |
| Table |
|
|
Page Items | Descriptions |
|
|
SNMP Community | Display SNMP Community String that is currently used to communicate to |
| the device through SNMP |
New Community | User can change the SNMP Community String by entering a new Community |
| string |
Confirm Community | User must enter the same community string as New Community string to |
| confirm. |
|
|
Access Filters | Display the Current Access Filter status |
| User can change the Access Filter status. |
IP | List of 3 IP filters. |
| User can enter the IP address and mask. |
|
|
5.1.3. Reset Options
All reset options power cycles the device and restarts the whole system.
Reset: To reset the device. The device will come up with the current configuration/values.
Reset to Defaults: To reset the device to default configuration values.
Delayed Reset: To reset the device at a particular time and can be programmed to do so on a daily/weekly/monthly basis. The current time can be set by specifying a NTP server (there is one already specified by default) and the time zone. After enabling the delayed reset, specify a time which is valid in reference to current time. When recurrence is set to weekly, monthly or daily, the reference is made with the first set time i.e. Reset time.
airPoint™ Nexus User Configuration Guide | Page 34 of 55 |
|
