SmartBridges sB3210 manual Setting Default Value Range Purpose

		i n t e l l i g e n t		w i r e l e s s		p l a t f o r m
	Setting	Default Value	Range		Purpose
	Bridge forward delay	15	4-30		The period of time a bridge will
					wait (the listen and learn period)
					before beginning to forward data
					packets.
	Ethernet port (ETH A)	100	0-65535		The cost of using the port to
	path cost				reach the root bridge. When
					selecting among multiple links to
					the root bridge, STP chooses the
					link with the lowest path cost and
					blocks the other paths. Each port
					type has its own default STP path
					cost.
	Ethernet port (ETH A)	128	0-255		The preference that STP gives
	priority				this port relative to other ports for
					forwarding traffic out of the
					spanning tree.
					A higher numerical value means
					a lower priority; thus, the highest
					priority is 8.
	Ethernet port (ETH B)	100	0-65535		The cost of using the port to
	path cost				reach the root bridge. When
					selecting among multiple links to
					the root bridge, STP chooses the
					link with the lowest path cost and
					blocks the other paths. Each port
					type has its own default STP path
					cost.
	Ethernet port (ETH B)	128	0-255		The preference that STP gives
	priority				this port relative to other ports for
					forwarding traffic out of the
					spanning tree.
					A higher numerical value means
					a lower priority; thus, the highest
					priority is 8.
	Radio port (Radio A)	100	0-65535		The cost of using the port to
	path cost				reach the root bridge. When
					selecting among multiple links to
					the root bridge, STP chooses the
					link with the lowest path cost and
					blocks the other paths. Each port
					type has its own default STP path
					cost.
	Radio port (Radio A)	128	0-255		The preference that STP gives
	priority				this port relative to other ports for
					forwarding traffic out of the
					spanning tree.
					A higher numerical value means
					a lower priority; thus, the highest
					priority is 8.
airPoint™ Nexus User Configuration Guide						Page 23 of 55