Page 35 of 55
airPoint™ Nexus User Configuration Guide
intelligent wireless platform
Figure 5-3 Delayed Reset
For delayed reset, follow the steps below:
1. Select date from the calendar that has been pr ovided.
2. Select the recurrence.
3. Click ’Apply Changes’ button to change the settings.
4. If user wants to disable ‘Delayed Reset’, ch eck the box that has been provided.
5.1.4. NTP Time Server Setup
The device time comes from the network time infor mation source. The device needs access to a
network timer (NTP time server) source. The NTP time server IP can be configured as follows:
1. From the ’System Configuration’ page, click on the ’N TP Server Setting’ link.
2. A ‘Time Settings’ page will be displayed. Click on the ‘NTP Server Settings’ link to enable
timer settings input.
3. Enter a valid NTP server IP address and select the Time Zone. The default NTP server is
128.250.36.2 and the default Time Zone is Singapore.
4. Click on the ’Apply Changes’ button to configure the NTP. The network time will appear on
the browser if the NTP server is contactable.
Note: Please ensure the NTP server IP is reachable from the device. Use the ping test tool from the
’Tools | Link Test’ to check if the NTP server can be pinged from the device. The device can
still operate without the Time Server configuration however you will not be able to perform
Delayed Reset function.