SmartBridges sB3412 aCNPT Router/NAT Configuration, Ethernet Configuration, i n t e l l i g e n t

Models: sB3412

1 78
Download 78 pages 50.39 Kb
Page 28
Image 28
2.8. aCNPT Router/NAT Configuration

i n t e l l i g e n t

w i r e l e s s

p l a t f o r m

 

 

 

2.8. aCNPT Router/NAT Configuration

The aCNPT unit can also be configured in Router or NAT mode which behaves like Infrastructure mode. The procedures for configuring the parameters in Router/NAT mode are given below. In this mode, the units will associate with any access point.

Note: The configuration procedure of parameters in NAT mode is the same as for Router mode.

2.8.1. Ethernet Configuration

The Ethernet IP is configured during the operational mode change to aCNPT Router mode.

Follow these steps below if you need to re-configure the aCNPT Router Ethernet parameters:

1.From the ’Summary Information’ page, click on the ’Ethernet Configuration’ link to change Ethernet parameters.

2.Enter the ‘IP address’ and ‘IP mask’.

3.Click on ‘Apply Changes’ to effect the changes.

Figure 2-15aCNPT Router Ethernet Configuration

airClient™ Nexus PRO TOTAL User Guide

Page 28 of 78

 

Page 28
Image 28
SmartBridges sB3412 manual aCNPT Router/NAT Configuration, Ethernet Configuration, i n t e l l i g e n t, w i r e l e s s