SmartBridges sB3412 Wpa-Psk, i n t e l l i g e n t, w i r e l e s s, p l a t f o r m, Page 38 of

i n t e l l i g e n t w i r e l e s s p l a t f o r m

4.Choose a WEP Key Size (64 Bits or 128 Bits) from the pull-down list. WEP key length is 10 characters for 64 Bits and 26 characters for 128 Bits.

5.Choose a Valid Key from the pull-down list.

6.Enter the WEP key in the Key Table entries.

7.Click the ’Apply Changes’ button to change the settings.

Note: The system will validate the key entries and provide error or warning notifications. The user must enter the key indicated by the Valid Key selection.

Figure 2-26 WEP ONLY Configuration

WPA-PSK:

In order to configure WPA-PSK follow the steps as below:

1.Click the ‘Security’ link from the ‘Radio Main’ page.

2.Select the WPA-PSK from the drop down menu of the Security Mode.

3.Enter the WPA-Shared Key (ASCII) in the dialog box provided.

4.Select the Encryption Type between TKIP and AES.

5.Click on the Apply changes to save the configuration details.

airClient™ Nexus PRO TOTAL User Guide Page 38 of 78