Step 18: Select the “Tunnel Setting” tab.
Step 19: Check “The tunnel endpoint is specified by this IP address” and enter “192.168.1.254.”
Step 20: Select the “Connection Type” tab.
Step 21: On the “Connection Type” page, select “All Network connections”.
Step 22: Click “OK” to complete the tunnel 1 xp->router configuration.
Filter List 2 (Router -> XP PC)
To configure tunnel 2, follow step1 through step 4 from the previous section.
Step 5: The “Filter Properties” window opens. Select A specific IP Subnet from the Source
Address field.
Step 6: Enter the IP address (192.168.2.0) and the Subnet mask (255.255.255.0).