
CHAPTER 8 Firewall Configuration
MAC/IP/Port Filtering
Figure 47: MAC/IP/Port Filtering
◆MAC/IP/Port Filtering — Enables or disables MAC/IP/Port Filtering. (Default: Disable)
◆Default Policy — When MAC/IP/Port Filtering is enabled, the default policy will be enabled. If you set the default policy to “Dropped”, all incoming packets that don’t match the rules will be dropped. If the policy is set to "Accepted," all incoming packets that don't match the rules are accepted. (Default: Dropped)
◆MAC Address — Specifies the MAC address to block or allow traffic from.
◆Destination IP Address — Specifies the destination IP address to block or allow traffic from.
– 92 –