Smith Cast Iron Boilers GB300 warranty Que Faire Si Vous Sentez Une Odeur De Gaz

Page 2

GB300 BOILER INSTALLATION AND OPERATION INSTRUCTIONS

Assurez-vous de bien suivre les instructions données dans cette notice pour réduire au minimum le risque d'incendie ou d'explosion ou pour éviter tout dommoge matériel, toute blessure ou la mort

Ne pas entreposer ni utiliser d'essence ou ni d'autres vapeurs ou liquides inflammables

àproximité de cet appareil ou de tout autre appareil.

QUE FAIRE SI VOUS SENTEZ UNE ODEUR DE GAZ:

• Ne pas tenter d'allumer d'appareil.

•Ne touchez à aucun interrupteur; ne pas vous servir des téléphones se trouvant dans le bâtiment.

•Appelez immédiatement votre fournisseur de gas depuis un voisin. Suivez les intructions du fournisseur.

•Si vous ne purvez rejoindre le fournisseur, appelez le service des incendies.

L'installation et l'entretien doivent être assurés par un installateur ou un service d'entretien qualifié ou par le fournisseur de gaz.

CONTENTS

Getting Started	page 2
Boiler Ratings & Capacities	page 3
Boiler Location	page 3
Combustion Air & Ventilation	page 4
Chimney & Vent Pipe Connections	page 5
Boiler Assembly	page 11
Heating System Piping	page 35
Gas Supply Piping	page 39
Electrical Wiring	page 40
Boiler Operation	page 41
Lighting Instructions	page 42
Boiler Checking & Adjustment	page 43
Boiler Maintenance	page 44
Repair Parts	page 46
Health Warnings	back cover

All aspects of the boiler installation must conform to the requirements of the authority having jurisdiction, or, in the absence of such requirements, to the National Fuel Gas Code, ANSI Z223.1/NFPA - latest revision. Where required by the authority having jurisdiction, the installation must conform to the Standard for Controls and Safety Devices for Automatically Fired Boilers, ANSI/ASME CSD-1.

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

In Canada, the installation must be in accordance with the requirements of CAN/CGA B149.1 or .2, Installation Code for Gas Burning Appliances and Equipment.

BEFORE YOU START

This manual covers the application, installation, operation and maintenance of a GB300(S,W) low pressure steam or hot water boiler.

To obtain the safe, dependable, efficient operation and long life for which this boiler was designed, these instructions must be read, understood and followed.

The GB300(S,W) boilers have been design certified by CSA for use with natural and propane gas under the latest revision of ANSI-Z21.13/CSA 4.9 Gas-Fired Low Pressure Steam and Hot Water Boilers and CGA 3.3, Gas-Fired Steam and Hot Water Boilers. Each unit has been constructed and hydrostatically tested for a maximum working pressure of 80 psi US, 50 psi Canada, 15 psi steam in accordance with Section IV of the A.S.M.E. Boiler and Pressure Vessel Code for cast iron boilers.

The owner should maintain a record of all service work performed with the date and a description of the work done. Include the name of the service organization for future reference.

Direct all questions to your Smith Cast Iron Boiler distributor or contact the Smith Customer Service Department, 260 North Elm Street, Westfield, MA 01085. Always include the model and serial numbers from the rating plate of the boiler in question.