Smith Cast Iron Boilers GB300 Marking Burner Base Rear Midpoint, Figure, Ceramic Rope Application

Models: GB300

1 52
Download 52 pages 14.03 Kb
Page 18
Image 18
Figure 26B

Page 18

GB300 BOILER INSTALLATION AND OPERATION INSTRUCTIONS

Figure 26B

Marking Burner Base Rear Midpoint

Figure 28

Ceramic Rope Application

Apply two coats of the spray adhesive supplied with the

Figure 29

Trimming Ceramic Rope

boiler to the rope seal grooves, Figure 27. Allow time for

 

 

the first coat to become tacky before applying the second

 

 

coat.

 

 

 

CAUTION: Do not get any of the spray adhesive in

 

 

the seal ports or premature failure of the seals may

 

 

occur voiding the warranty!

 

 

Figure 27

Ceramic Rope Adhesive Application

 

 

Figure 30

Casting w/ Ceramic Rope

When the second coat is tacky lay the rope seal into the three rope groves and press in place. Trim the rope off flush with the edge of the cast iron section. The rope seal is to be applied only to one side of each cast iron section, Figures 28, 29 and 30.

Page 18
Image 18
Smith Cast Iron Boilers GB300 warranty Marking Burner Base Rear Midpoint, Figure, Ceramic Rope Application, coat