Configuring Interfaces
155
SonicOS Enhanced 4.0 Administrator Guide
Note To configure the SonicWALL TZ 190 for Connect on Data operation, you must select Dial
on Data as the Dial Type for the Connection Profile. See “Configuring WWAN
Connection Profiles” on page 283 in Chapter 32, Configuring Wireless WAN for more
details.
Step 3 Select which protocols can be used for administrators and users to log in to the SonicWALL TZ
190 appliance over the WWAN interface in the Management/User Login section must be
configure to enable remote management of the SonicWALL TZ 190 appliance over the WWAN
interface.
Step 4 Select Add rule to enable redirect from HTTP to HTTPS to allow the SonicWALL to
automatically convert HTTP requests to HTTPS requests for added security. Bear in mind that
HTTP traffic is less secure than HTTPS.
Step 5 Click on the Profiles tab.
Step 6 Select the Primary WWAN connection profile in the Primary Profile pull-down menu.
Optionally, you can select up to two alternate WWAN profiles.
Note WWAN connection profiles are configured on the WWAN > Connection Profiles page. For
more information, see “Configuring WWAN Connection Profiles” on page 283 in Chapter 32,
Configuring Wireless WAN for more details.