VPN > Settings
563
SonicOS Enhanced 4.0 Administrator Guide
Configuring a VPN Policy with IKE using Preshared Secret
To configure a VPN Policy using Internet Key Exchange (IKE), follow the steps below:
Step 1 Clic k Add on the VPN > Settings page. The VPN Policy window is displayed.
Step 2 In the General tab, select IKE using Preshared Secret from the Authentication Method
menu.
Step 3 Enter a name for the policy in the Name field.
Step 4 Enter the host name or IP address of the remote connection in the IPsec Primary Gateway
Name or Address field.
Step 5 If the Remote VPN device supports more than one endpoint, you may optionally enter a second
host name or IP address of the remote connection in the IPsec Secondary Gateway Name or
Address field.
Note Secondary gateways are not supported with IKEv2.
Step 6 Enter a Shared Secret password to be used to setup the Security Association the Shared
Secret and Confirm Shared Secret fields. The Shared Secret must be at least 4 characters
long, and should comprise both numbers and letters.