Network > Routing
238
SonicOS Enhanced 4.0 Administrator Guide
By default, Advanced Routing Services are disabled, and must be enabled to be made
available. At the top of the Network > Routing page, is a checkbox Use Advanced Routing.
Toggling the state of this checkbox will require a reboot for the changes to take effect. When
the SonicWALL is running in Advanced Routing mode, the top of the Network > Routing page
will look as follows:
The operation of the RIP and OSPF routing protocols is interface dependent. Each interface
and virtual sub-interface can have RIP and OSPF settings configured separately, and each
interface can run both RIP and OSPF routers.
Configure RIP and OSPF for default routes received from Advanced Routing protocols as
follows:
Configuring RIP
To configure RIP routing on an interface, select the (Configure) icon in the interface’s row
under the “Configure RIP” column. This will launch the RIP Configuration window.