WWAN
383
SonicOS Enhanced 4.0 Administrator Guide
13. Select the Enable Inactivity Disconnect (minutes) checkbox and enter a number in the
field to have the WWAN connection disconnected after the specified number of minutes of
inactivity. Note that this option is not available if the Dial Type is Persistent Connection.
14. Select the Enable Max Connection Time (minutes) checkbox and enter a number in the
field to have the WWAN connection disconnected after the specified number of minutes,
regardless if the session is inactive or not. Enter a value in the Delay Before Reconnect
(minutes) to have the SonicWALL TZ 190 automatically reconnect after the specified
number of minutes.
15. Select the Dial Retries per Phone Number checkbox and enter a number in the field to
specify the number of times the SonicWALL TZ 190 is to attempt to reconnect.
16. Select the Delay Between Retries (seconds) checkbox and enter a number in the field to
specify the number of seconds between retry attempts.
17. Select the Disable VPN when Dialed checkbox to disable VPN connections over the
WWAN interface.
18. Click on the IP Addresses tab.
By default, WWAN connection profiles are configured to obtain IP addresses and DNS
server addresses automatically. To specify a static IP address, select the Use the
following IP Address radio box and enter the IP address in the field.
To manually enter DNS server addresses, select the Use the following IP Address radio
box and enter the IP addresses of the primary and secondary DNS servers in the fields.