SonicWALL TZ 190 Viewing the WWAN Status , Configuring Wireless WAN

WWAN
377
SonicOS Enhanced 4.0 Administrator Guide
Viewing the WWAN Status
The WWAN > Status page displays the current status of WWAN on the SonicWALL TZ190. It
indicates the status of the WWAN connection, the current active WAN interface, or the current
backup WAN interface. It also displays IP address information, DNS server addresses, the
current active dial up profile, and the current signal strength.
Configuring Wireless WAN
To configure the Wireless WAN interface on the SonicWALL TZ 190 appliance, complete the
following tasks:
• “Configuring WWAN Basic Settings” on page 377
• “Configuring WWAN Advanced Settings” on page 380
• “Configuring WWAN Connection Profiles” on page 381
• “Configuring the Maximum Allowed WWAN Connections” on page 384
• “Managing WWAN Connections” on page 384
• “Specifying the WAN Connection Model” on page 385
Most of the WWAN settings can also be configured on the Network > Interfaces page. WWAN
Connection Profiles can only be configured on the WWAN > Connection Profiles page. The
maximum number of hosts allowed to connect to the WWAN interface can only be configured
on the Network > Interfaces page. See “Configuring the Wireless WAN Interface” on page 152
for more information.
Configuring WWAN Basic Settings
On the WWAN > Settings page, you can configure the following three settings:
• “Connect on Data” on page 378