333
SonicOS Enhanced 4.0 Administrator Guide
CHAPTER 29
Chapter 29: Configuring WEP and WPA Security

Wireless > WEP/WPA Security

Note When the SonicWALL wireless security appliance is configured in Access Point mode, this
page is called Security. When the appliance is configured in Wireless Bridge mode, this
page is called WEP Encryption.
Wired Equivalent Protocol (WEP) can be used to protect data as it is transmitted over the
wireless network, but it provides no protection past the SonicWALL. It is designed to provide a
minimal level of protection for transmitted data, and is not recommended for network
deployments requiring a high degree of security. WiFiSec should be enabled in addition to WEP
for added security on the wireless network.
Wi-Fi Protected Access (WPA and WPA2) provides much greater security than WEP, but
requires a separate authentication protocol, such as RADIUS, be used to authenticate all users.
WPA uses a dynamic key that constantly changes, as opposed to the static key that WEP uses.
The SonicWALL Secure Anti-Virus Router provides a number of permutations of WEP and
WPA encryption.