SonicWALL TZ 190 Creating a NAT Policy for the Secondary WAN Port

Network > WAN Failover & Load Balancing
183
SonicOS Enhanced 4.0 Administrator Guide
Creating a NAT Policy for the Secondary WAN Port
You need to create a NAT policy on your SonicWALL for WAN Failover. Follow these steps to
create a NAT policy on your SonicWALL using the OPT interface:
Step 1 Select Network > NAT Policies.
Step 2 Clic k Add. The Add NAT Policy window is displayed.
Step 3 Select Any from the Original Source menu.
Step 4 Select OPT IP from the Translated Sou rce menu.
Step 5 Select Any from the Original Destination menu.
Step 6 Select Original from the Translated Destination menu.
Step 7 Select Any from the Original Service menu.
Step 8 Select Original from the Translated Service menu.
Step 9 Select LAN from the Inbound Interface menu.
Step 10 Select OPT interface from the Outbound Interface menu.
Step 11 Make sure the Enable setting is checked.
Step 12 Click OK.