SonicWALL TZ 190 Configuring OSPF

Network > Routing
240
SonicOS Enhanced 4.0 Administrator Guide
Redistribute Connected Networks - Enables or disables the advertising of locally connected
networks into the RIP system. The metric can be explicitly set for this redistribution, or it can
use the value (default) specified in the ‘Default Metric’ setting.
Redistribute OSPF Routes - Enables or disables the advertising of routes learned via OSPF
into the RIP system. The metric can be explicitly set for this redistribution, or it can use the value
(default) specified in the ‘Default Metric’ setting.
Redistribute Remote VPN Networks - Enables or disables the advertising of static (Policy
Based Routing) routes into the RIP system. The metric can be explicitly set for this
redistribution, or it can use the value (default) specified in the ‘Default Metric’ setting.
Routes learned via RIP will appear in the Route Policies table as ‘OSPR or RIP routes’:
Configuring OSPF
Note OSPF design concepts are beyond the scope of this document. The following section
describes how to configure a SonicWALL to integrate into an OSPF network, be it existing
or newly implemented, but it does not offer design guidelines. For terms used throughout
this section, refer to the ‘OSPF Terms’ section above.
Consider the following simple example network: