Wireless > Virtual Access Point
359
SonicOS Enhanced 4.0 Administrator Guide
WLAN Subnets
WLAN subnets are used to segment IP address space for use by Virtual Access Points (VAP).
Each VAP must have a separate WLAN subnet, and you must create the WLAN subnet before
creating the VAP. To create a WLAN subnet, complete the following steps.
Step 1 Navigate to the Network > Interfaces page.
Step 2 Clic k the Add WLAN Subnet button.
Step 3 Configure the following options:
• Zone: By default, the zone is set to WLAN. You can select any other wireless zone that you
have created on the Network > Zones page.
Redirect SMTP traffic to Redirects SMTP traffic incoming on this zone to an SMTP server
you specify. Select the address object to redirect traffic to.
Deny Networks Blocks traffic from the networks you specify. Select the subnet,
address group, or IP address to block traffic from.
Pass Networks Automatically allows traffic through the Wireless Zone from the
networks you select.
Max Guests Specifies the maximum number of guest users allowed to
connect to the Wireless Zone. The default is 10.
Feature Description